TechniSat TECHNIRADIO 3, Инструкция по эксплуатации

Страница: 42 / 119

82 83
DE
EN
DA
NL
> Please note that the device feet could leave coloured marks on some types of
furniture surfaces in certain situations. Place a protective layer between your
furniture and the device.
> Keep the TECHNIRADIO 3 away from devices that emit intense magnetic fields.
> Do not place any heavy objects on the device.
> If you move the device from a cold environment to a hot environment, moisture
could accumulate inside the device. In this case, wait approximately one hour
before putting it into operation.
> Route the mains cable in such a way that nobody can trip over it.
> Ensure that the mains cable or the power supply unit are always easily accessible,
so that the device can be quickly disconnected from the power supply!
> The power outlet should be as close to the device as possible.
> To ensure a connection to the mains, insert the plug fully into the socket.
> Use a suitable, easy-to-access mains connection and avoid using multiple socket
strips!
4 Setting up the device
> Place the device on a firm, secure and horizontal surface. Make sure the area is
well ventilated.
Caution!:
> Do not place the radio on soft surfaces such as carpets and blankets, or near to
curtains and wall hangings. These could obstruct the ventilation openings. The
necessary flow of air could be interrupted as a result. This could potentially lead
to fire in the device.
> Do not place the radio near to sources of heat, such as radiators. Avoid direct
sunlight and very dusty environments.
> Do not select a location for the device with high air humidity, e.g. a kitchen or
sauna, since condensation could damage the device. The device is intended for
use in a dry environment and in a moderate climate and must not be exposed to
dripping or splashing water.