TechniSat TECHNIRADIO 3, Инструкция по эксплуатации

Страница: 56 / 119

110 111
DE
EN
DA
NL
The Tune> button increases the value, the <Tune button reduces the value.
> Press Select to apply the setting.
> The next time digits (minutes) start to flash and can again be changed as
described above.
> Press the Select button after every additional setting in order to go to the next
setting.
> To set the date, proceed in the same way as described above.
> After all settings have been done and the
Select
button pressed,
[Time saved]
appears on the display.
9.3.2 Automatic time updating
In this submenu, you can determine whether the time update should be done
automatically via DAB+ or FM, or whether you wish to enter it manually (section 9.3.1).
>
In the sub-menu [System] , use the <Tune or Tune> buttons to select the [Time]
entry, and then press the Select button.
> Using <Tune or Tune> , select the [Autom. Update] item and press Select .
> Select the following options using the <Tune or Tune> and Select buttons:
[Update all] (update via DAB+ and FM)
[Update from DAB] (update via DAB+ only)
[Update from FM] (update via FM only)
[No update] (Time / date has to be entered manually, see Item 9.3.1).
9.3.3 Setting the time format
In the Set 12 / 24 hrs. time submenu, you can activate the 12-hour or 24-hour format.
> Use the <Tune or Tune> buttons in the time sub-menu to select [set 12 / 24
hrs.] and press Select .
> Using the <Tune or Tune> buttons, select one of the following options:
[Set 24 hrs.]
[Set 12 hrs.]
> Press the Select button to confirm.
9.3.4 Setting the date format
In the time sub-menu Set date format you can determine the format for displaying the
date.
>
Use the <Tune or Tune> buttons in the time sub-menu to select [set date
format] and press Select .