8
Volume control
> Adjust the volume of your digital receiver using the key to increase the volume, and Volume –
to decrease the volume.
> Press the mute key to switch the sound on or off.
TV/Radio switching
> By pressing the TV/Radio button, you can switch between TV and Radio operation.
Access Electronic Channel Guide (EPG):
> Press the SFI/EPG key on the remote control of the digital receiver.
The Electronic Channel Guide then appears on the screen. The channels you have selected, or those
of the factory default settings, will be shown with their current channels. You can now also use the EPG
function to obtain information on various channels. In addition, you may use the EPG functions to select
a particular channel, to pre-select a channel, or to set a timer for a channel.
Exit EPG
> Press either the Menu or the TV/Radio key to return to normal operation.
Hard disk operation
Recording
Warning!!!
Simultaneous receiving of two encrypted channels
Your receiver also allows you to receive two different encrypted channels simultaneously, using only one
CI module and only a single valid Smartcard. However, this is only possible if you use a CI module with
the “Dual-Decrypt” function (see details of the CI module manufacturer), both the desired channels are
located on the same transmitter and the CI dual decryption function has been correctly selected.
Please ensure that the receiver has acquired the time. During operation, this is displayed in the Infobox
and during standby operation on the display. If this is not the case, leave the receiver switched on to a
selected channel for approximately 30 seconds, so that the receiver can acquire the current time.
1. Immediate recording
Select this recording type, to record the broadcast currently showing immediately with the touch of a but-
ton.
2. Time-controlled recording
This function can be used to switch your digital receiver on and off for the selected broadcast, in order to
record onto the hard disk when you are away. The time can be channeld either manually or automatically
via the EPG function.
3. Timeshift recording
The timeshift recording function makes delayed TV viewing possible. With this function, even while the
recording continues, you can use a time-delayed play back.
