5
Mute
On/Standby
Sleep timer
Remote control option
(Code+OK
at the same time)
Numeric keys
Multifunctional keys
TV/Radio
Recording
OK/
Channel list
On/Off
Arrow keys left/right
Volume–
Back
Info
Playback functions
Arrow down/Arrow up
C /Channel –
C/–
Stop/Freeze frame
/–
Menu On/Off
Video text
On/Mix/Off
Option button
Operation with a rotating antenna
b
During operation with a rotating antenna, connect the DiSEqC engine (Level 1.2) with the LNB input 1.
Connection to a television set
d
Connect the receiver (HDMI output) and TV (HDMI input) via an HDMI cable.
If your TV is suitably equipped, it will automatically switch to the HDMI input when the digital receiver is
switched on.
Or: e
Connect the receiver (component output) and TV (component input) via a component cable.
Alternatively: f
Use a SCART cable to connect the receiver (SCART socket TV) with the television set
(SCART socket). If your television set is appropriately equipped, it will automatically switch to AV, and thus
to satellite operation, when the digital receiver is switched on. Where applicable, it may be necessary to
adapt the type of signal for your television set.
Important operating instructions
The operation of the digital receiver is
simplified by the use of the “On Screen
Displays”, which also serves to reduce
the number of keys required on the
remote control unit. All functions are
displayed on the screen, and can be op-
erated with a few keys. Related functions
are combined in a “MENU”. The function
selected is highlighted in colour. The
“function keys” red, yellow, green and
blue are indicated by colour bars in the
bottom line. These colour bars represent
different functions in the various menus,
which will be activated by pressing the
appropriate coloured key (multifunction
key) on the remote control. The “Func-
tion keys” are only active when a brief
description is displayed in the appropri-
ate field.
Help:
Where available in the menus, pressing the blue function key will cause a help text to be dis-
played, pressing again will remove the text from the screen.
Initial installation
When switching on the unit for the first time, a start window will be displayed, with the installation as
-
sistant AutoInstall. Please follow the instructions displayed on screen. If you do not implement the initial
installation, or if it is not completed, the receiver will commence operation with a standard pre-channeld
configuration.
Antenna configuration
In this installation step you can adjust the digital receiver to the configuration of your antenna.
> If you wish to accept the standard antenna setting, use the arrow keys up/down to highlight the field
Standard and confirm by pressing OK.
> If the configuration of your receiving installation does not correspond with the standard setting, highlight
the field Manual and confirm by pressing OK.
