7.14 Sub-titles
7.13 Video text
7.13.2 Using the internal video text decoder
7.13.1 Using the video text decoder of your television set
Wherever it is broadcast, video text will be supplied to your television set. To operate the video
text display, use the remote control of your television set. If you experience problems with your
television set, such as overlapping of video text and picture content, you should set your digital
receiver to
FBAS mode
(Point 6.3.2.)
As an alternative, you may use the integrated TOP video text decoder to display the
information. With TOP video text all text pages are automatically divided into groups and
blocks, which makes the video text more readable.
>
Switch to the programme on which you wish to view video text information.
> Press the
Videotext
key to switch on the video text display.
>
Use the
numeric keys
to enter the video text page you wish to view. Your entry will
be displayed in the top left hand corner of the screen. Once you have entered the
desired video text page, the receiver will search for the appropriate page.
As not all video text pages can be transmitted simultaneously, it may take a few
seconds for your receiver to find the correct page, and to display it on the television
screen. All video text providers use page 100 to show the index to contents.
> Use the
red
resp.
green
keys to page forward or backward one page at a time.
>
Use the
yellow
function key to display the video text group shown in the yellow field.
> Use the
blue
function key to display the video text block shown in the blue field.
Mixed operation
> Pressing the
Videotext
key again will switch to mixed operation, i.e. both video text
and TV picture will be shown simultaneously on the screen.
> Press this key again to return to normal operation.
Stop paging
> Press the
Freeze frame
key, and the upper left corner of the video text window will
display the message “Stop”. This stops the continued paging through the video text
sub-pages. Press the
Freeze frame
key again to disable the Stop operation again.
> Press the
Back
key to return to normal operation.
Where sub-titles are broadcast, this is indicated by displaying the message
Select Sub-title
.
If you have enabled the
Sub-title
function in accordance with Point 6.3, these will be
automatically displayed, with the provision that they are being broadcast in the language
selected.
If the sub-titles are only being broadcast in other languages, or are only available via video text,
you can switch the display on manually as follows.
24
Содержание DIGIT MF4-S
Страница 52: ...Notes 52...
