Fault
Possible cause
Solution
Receiver cannot be
operated, switched on or off
Defective data stream -->
receiver blocked
Hold down the On/Stand-
by button on the receiver
or the remote control for
approx. 5 seconds
Disconnect mains plug for
approx. 5 seconds, then
reconnect receiver
Perform Flash-Reset:
Warning!
All personal settings will be
lost
> Remove mains adapter
from the receiver
>
Press and hold
Standby
and the
up
arrow key
at the
same time
> Reinsert the mains
adapter while
Standby
and the
up arrow key
are pressed down
> Keep both buttons
pressed down for
approx. 5 sec. then
release. “
Factory
setting
” appears in the
display
USB device not recognised
USB device formatted for
wrong file system
Format USB device in the
FAT32 file system
Device automatically
switches off after a certain
time
Auto Standby function
enabled
Check Auto Standby setting
and disable if necessary
39
