13
>
Press the
OK
button to open the window containing the programme providers
available for selection.
>
Use the
up/down arrow keys
to select the programme provider you want and
follow the instructions on the screen.
Antenna signals
In this section in the installation wizard, select how many antenna cables are connected to
the receiver.
>
Use the
right/left arrow keys
to select whether you have connected
1
or
2
antenna signals.
>
Confirm with the
OK
key to accept the selection.
Antenna configuration
In this step of the installation you can adapt your digital receiver setup to the configuration
of your antenna.
>
If you want to accept the default antenna setting, press the
OK
button.
>
If the configuration of your reception equipment does not conform to the default
setting, press the
Options key
.
>
Then create the antenna settings
according to your reception equipment and press
the
Back
key to go back to the antenna configuration overview.
>
Then confirm with the
OK
button to accept the settings.
Network configuration
In this step the device will automatically check for a network configuration.
>
If you do not want to run the network configuration check, press the
Info
button.
