3
Phone: (800) 597-3921 or (317) 803-8000 • Fax: (317) 803-8001
00450 PARTS IDENTIFICATION & MACHINE REQUIREMENTS
Model 00450 ShrinkSTATION
width 16” x depth 16” x height 22” - Weight: 60 lbs
FEATURES
• Output power of 13kw
• Change 1/8" - 1-1/4" shanks in seconds
• Automatic cooling cycle by compressed air
Part No.
Description
Tool Change
Rating
L x D x H
Ship Wt.
00450
ShrinkSTATION
6-8 sec.
3 phase, 480V, 20A
16"x 16"x 22"
60 lbs
PRODUCT SPECS
Minimum Power Supply
Maximum Power Supply
440 VAC, 3-phase 20 amp
480 VAC, 3 phase, 20 amp
Part No.
Description
00450
induction heat shrink fit machine
00165
induction stop ring (3-5mm)
00166
induction stop ring (6-12mm)
00167
induction stop ring (14-20mm)
00301-01.4
induction stop ring (25-32mm)
00151
toolholder adapter - 30 taper
00152
toolholder adapter - 40 taper & C6
00153
toolholder adapter - 50 taper
00157
toolholder adapter - HSK40 & C4
00158
toolholder adapter - HSK50 & C5
00159
toolholder adapter - HSK63
transport adapter for extended lengths
26139-L
thermal insulated glove
SHRINKSTATION INCLUDES:
The ShrinkSTATION is an ideal solution for job shops or manufacturing facilities that
need a reliable shrink fit machine that can handle practically all sizes and types of
toolholders, and is affordable.
Every component of this machine from the industrial touch-screen interface, to the
motor driven transport rail, and the heavy-duty stainless steel base, is designed for
reliable performance and ease-of-use in demanding environments.
The ShrinkSTATION includes everything you need to perform shrink fit tool changes
on CAT40, CAT50, BT30, BT40, ISO30, HSK40, 50, 63 and 100, C4, C5, C6 toolholders with
gauge lengths up to 22” (560mm).
TOUCH SCREEN CAPABILITIES
Jog Speed
– The speed of the tool holder during manual movement.
Auto Up Speed
– The speed of the tool holder during automated
movement toward the induction head.
Auto Down Speed
– The speed of the tool holder during automated
movement away from the induction head.
Drop Speed
– The speed of the tool holder during automated
movement from induction ring to the drop point.
Drop Distance
– The distance the tool holder travels to provide the
optimum gap between the tool holder and the induction ring.
Auto Down Distance
– The distance the tool holder travels to travel
away from the induction head for easy removal of the tool holder.
Lower EOT
– The “Lower End Of Travel” switch inhibits the tool
holder movement away from the induction head, when the switch
is not activated.
Upper EOT
– The “Upper End Of Travel” switch inhibits the tool
holder movement toward the induction head. If the induction ring
is not in place, the switch should not be activated.
NEMA L8-20R
NEMA L8-20P
NEMA L8-20P plug comes installed on
the power cord. Requires a NEMA L8-20R
receptacle.
Reminder:
This machine heats the cutting tool and toolholder assembly. All personnel should be clear of the machine before
starting a tool change cycle. Wear the provided insulated glove to prevent accidental burns. Any glove used when operating this
machine should be rated at 500°F (260°C) or higher.
