Technicolor TG672, Руководство по установке и эксплуатации

Страница: 64 / 152

56
4 CONFIGURATION TOOLS
E-DOC-CTC-20100728-0008 v2.0
Use:

The arrow keys to select a command(group)

The TAB key to switch between the OK and Cancel button.

CTRL+C to switch back to exit the menu mode.
The Help Command
Execute
help
or
?
from top level to list all available commands and command groups for the Technicolor Gateway
You can execute the
help
command from each command group selection. This results in a list of the available commands
(and underlying command groups, if available) in this particular command group.
Example:
Command Completion
When you type the first letters of your command, you can complete the command by pressing TAB.
To be able to complete the command automatically, the part to be added must be unique. If the part is not unique, the CLI
will provide a list of possible commands.
Completion works for:

Command groups

Commands

Options

Values coming from a list
Command Line Navigation
Press:

CTRL+A to go to the beginning of the command line.

CTRL+L to go to the end of the command line.
Breaking off Commands
You can break off a command by pressing CTRL+G or CTRL+C. This can be useful in a situation where a user is prompted
to enter a value which he does not know and wants to quit the command. Instead of being prompted over and over again for
the same value, this allows to quit the command and return to the command line prompt.
Example:
In the example below, CTRL+C is pressed after the third prompt:
[firewall]=>help
Following commands are available :
config : Display/Modify firewall configuration.
clear : Clear firewall configuration.
list : Display firewall configuration.
Following command groups are available :
chain debug level rule
Executing, for example,
:help firewall
from any level gives the same result as executing help from the
firewall command group.
[firewall chain]=>add
chain =
Required parameter (use ctrl-c or ctrl-g to abort)
chain =
Required parameter (use ctrl-c or ctrl-g to abort)
chain =
[firewall chain]=>