background image

2

The following symbols used in this manual, alert you 

to potentially dangerous conditions to users, service 

personnel or the appliance:

This symbol refers to a hazard or unsafe practice which 

can result in severe personal injury or death.

This symbol refers to a hazard or unsafe practice which can 

result in personal injury or product or property damage.

This air conditioner is equipped with cooling, drying, heating and fan only functions. 
Details on these functions are provided below; refer on these descriptions when using the air conditioner.

CoNTENTS

NAME OF PARTS AND OPERATION SELECTOR SWITCH 

  3

INSTALLATION LOCATION 

  4

ELECTRICAL REQUIREMENTS 

  4

SAFETY INSTRUCTIONS 

  4

USING THE REMOTE CONTROL UNIT 

  4

REMOTE CONTROL UNIT 

5

HOW TO SET THE PRESENT TIME 

6

COOLING 

 6

HEATING 

 6

AUTOMATIC OPERATION 

  6

DEHUMIDIFYING (DRY) 

  7

FAN ONLY  

  7

ADJUSTING THE FAN SPEED  

  7

NIGHT MODE/ENERGY SAVING 

  7

HIGH POWER MODE 

  7

SETTING THE TIMER  

  8

SETTING THE 1 HOUR TIMER  

  8

SETTING THE HOLIDAY TIMER  

  8

OPERATION WITHOUT THE REMOTE CONTROL UNIT 

  9

CARE AND CLEANING 

  9

TIPS FOR ENERGY SAVING 

  10

TROUBLESHOOTING 

 10

EXPLANATION AND USE OF THE REMOTE CONTROL UNIT’S MICROSWITCHES   14

NoTE

 

PRODUCT INFORMATION

If you have problems or questions concerning your Air 
Conditioner, you will need the following information. Model 
and serial numbers are on the nameplate on the bottom 
of the cabinet.
Model No.
Serial No.
Date of purchase
Dealer’s address
Phone number

 

ALERT SYMBOLS

EG

WARNING

CAUTIoN

DECLARATION OF CONFORMITY

This product is marked              as it satisfies Directives:

– Low voltage no. 2006/95/EC 

(Standard: EN60335-2-40:2003 (incl. Corr.:2006) + A11:2004 + A12:2005 + A13:2012 

+ A1:2006 + A2:2009 con EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 

+ A15:2011).

– Electromagnetic compatibility no. 2004/108/EC, 92/31 EEC and 93/68 EEC. 

(Standard: EN55014-1 (2006) + 

A1(2009) + A2(2011), EN 55014-2 (1997) + A1(2001) + A2 (2008), EN 61000-3-2 (2006) + A1(2009) + A2(2009), 

  EN 61000-3-3 (2008)

– RoHS2 no.2011/65/EU.

– Regulation (EU) no. 206/2012, of 6 march 2012, concerning the specifications for ecodesign requirements of air 

conditioners and fans.

– Regulation (EU) no. 626/2011, of 4 may 2011, concerning the labeling indicating the energy consumption of air 

conditioners.

This declaration will become void in case of misuse and/or non observance though partial of manufacturer’s 

installation and/or operating instructions.

Содержание DSA10FICR5IBA
















Отзывы: