background image

INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN 
DIRECTIVE 2012/19/EU

At the end of its working life this equipment must not be disposed of as an household waste.
It must be taken to special local community waste collection centres or to a dealer providing this service.
Disposing of an electrical and electronic equipment separately avoids possible negative effects on the environment 
and human health deriving from an inappropriate disposal and enables its components to be recovered and recycled 
to obtain significant savings in energy and resources. 
In order to underline the duty to dispose of this equipment separately, the product is marked with a crossed-out dustbin.

INFORMATION FOR CORRECT DISPOSAL OF THE BATTERY IN ACCORDANCE WITH THE EUROPEAN 
DIRECTIVE 2006/66/EC

Please replace battery when its electricity charge is used up: please do not eliminate this battery together with normal 
household waste. It must be taken to special local community waste collection centres or to a dealer providing this 
service. Disposing of a battery separately avoids possible negative effects on the environment and human health 
deriving from an inappropriate disposal and enables its components to be recovered and recycled to obtain significant 
savings in energy and resources. In order to underline the duty to dispose of this equipment separately, the battery 
is marked with a crossed-out dustbin.

REGULATION (EU) No. 517/2014 - F-GAS

The unit contains R410A, a fluorinated greenhouse gas with a global warming potential (GWP) of 
2087.50. Do not release R410A into the atmosphere. 

EXPLANATION AND USE OF THE REMOTE CONTROL UNIT’S MICROSWITCHES

Switch 1 and 2:

 These switches are used to match the remote control with the 

specific internal units.

Switch 3 and 4:

 these switches have been provided for future use; they have no 

function today. Keep them in OFF position.

Switch 5 and 6:

 these switches set the remote control in WIRELESS or WIRED 

mode. Default position is ON (WIRELESS mode). For WIRED control, remove the 
batteries and set in OFF position.

HOW TO REMOVE BATTERIES

l

  Remove the lid.

l

  Press the battery toward the negative end 

and lift it out by its positive end (as shown 
in the figure).

l

  Remove the other battery in the same way.

14

EG

Содержание DSA10FICR5IBA
















Отзывы: