6
used solely for a 0% to 100% switching. Before applying power to a fixture, check that the
fixture’s input voltage matches the power source voltage. Consult a qualified electrician if there
are any concerns about proper connection to power.
Mounting
Always consult a qualified professional when rigging. Consider access for routine maintenance
when selecting a mounting position. This fixture may be mounted in any position provided there
is adequate room for movement and ventilation. Mount the fixture securely using the two
mounting holes provided on both sides of the base. This fixture features an adjustable base
which allows the panel to be tilted at different desired angles. Always keep cords out of the way,
thus preventing any trip hazards. Secure all cables properly. Do not mount where the fixture will
be exposed to heavy water fall, high humidity, extreme temperature changes or restricted
ventilation. Do not obstruct any of the heat sink vents.
Optional Mounting Bracket
There is an optional mounting omega bracket available
that allows the use of a standard truss clamp to be
mounted to this fixture. This mounting bracket must be
purchased separately if needed. It provides a ½” sized clamp mounting hole.
Order code: CL-OMEGA3
Basic Reference
Adjustable Bracket
Knobs
Female XLR 3-pin
Data Output Cable
Male XLR 3-pin
Data Input Cable
A & B Setting
Push Buttons
Power Input Cable
Segment LED Display
