Techmaster T9530, Инструкция по программированию и эксплуатации

Страница: 5 / 32

IU_TechMaster_02_eng Page 5 of 32
Penalty
Four consecutive invalid codes initiates four minutes delay period. During this period
LCD will display the message “Penalty” when any operation will be performed.
Programming TechMaster
All the following programming instructions of TechMaster must be intended for only
one lock ( this also includes Master and Manager codes ). If your TechMaster has
more than one lock you must repeat the instructions for each installed lock.
Multiple Locks
TechMaster can manage up to five locks.
Time Delay
Can be set on each lock.
Delay Period: 0 – 99 minutes; Open Period: 1 – 19 minutes.
Five Time Delays can run at once.
Dallas keys
Can be set on each lock, requires code and key. Available for all Manager and Users
(not available for the Master).
TechMaster only works with Dallas keys coded by Tecnosicurezza.
Low Battery Warning
Long audio and visual signals during opening indicate low battery.
Emergency battery
If your TechMaster is powered by the mains or an internal battery box it is possible to
connect an emergency battery to the keypad in case of sudden blackout: connect a
new 9V ALKALINE battery to the battery connector located at the bottom of the
keypad.
Silent Alarm Signal
Can be set on each lock.
Remote Disable
Can be set on each lock.