100
The table on this page provides a check box to enable or disable HTTP (i.e., Web
browser-based) access to the configuration program through the WAN port. In the Inactivity
TimeOut text box, you can specify a length of time in minutes after which external access will
be blocked, assuming that there is no access during that time.
If you want your changes to be in effect the next time you log in, click
Submit.
5.8.11 Autodetect
Autodetect
enables the modem to automatically detect and configure a valid ATM VC at
startup. Autodetect eliminates the need to have users configure VC values as described in
Configuring the ATM Virtual Circuit
[
Autodetect Modes
]
Autodetect can be used to establish PPPoE, PPPoA, IPoA-1577 and EoA connections and
can be configured in either of two modes:
bridging mode
and
routing mode
.
-- When Autodetect is configured in
bridging mode
, it can detect the presence of PPPoE
and EoA interfaces on the access server. In this mode, the modem must be configured as
a bridge and a PPPoE or DHCP client is expected to be running on the LAN PC (behind
the modem).
-- When configured in
routing mode
, Autodetect can detect PPPoE, EoA, PPPoA, or
IPoA-1577 interfaces on the access server. Autodetect searches for these interfaces in
that order. Depending on the interface detected, Autodetect creates a PPP, EoA, or IPoA
