Page 16
6.8.1
Inserting cards (codes) into the reader’s memory
Follow these steps for inserting cards into the
reader module’s memory:
Step 1
Step 2
Step 3
Read the programming card
(or enter the programming
code) for
inserting
: the reader
goes
into
programming
mode
.
One by one, read the cards
(enter user codes) which are
to be granted access.
About 15 seconds after
inserting the last card (code)
the reader module goes
back into
standard operating
mode
.
Pic.4 a): Inserting cards (codes)
6.8.2
Deleting cards (codes) from the reader’s memory
For deleting the cards from the reader module’s memory use following steps:
Step 1
Step 2
Step 3
Read the programming card
(or enter the programming
code) for
deleting
: the reader
goes
into
programming
mode
.
One by one, read the cards
(enter user codes) which are
to have their access revoked.
About 15 seconds after
deleting the last card (code)
the reader module goes
back into
standard operating
mode
.
Pic.4 b): Deleting cards (codes)
