& password again by SMS.
Installation
1. Obtain a 2G GSM phone SIM card that needs SMS service, incoming caller ID display, and
GPRS function. Please disable the PIN code of the SIM card, this SIM card phone number is the
tracker number and all other operations (calling and sending SMS) for the tracker.
2. Plug the tracker into the OBDII socket. The OBDII socket is normally under the car panel, if you
cannot find the OBDII socket, check the car manual or call your car manufacturer to confirm the
location of the OBDII interface (Please confirm that your vehicle has the OBDII interface before you
purchase this tracker).
3. After plug in the tracker to the OBDII socket, the tracker will switch on automatically. The built-in
rechargeable battery will start charging automatically. The tracking is triggered by the shock sensor. So
if the vehicle starts to move, the tracker will begin to upload its location and the tracker’s status will be
shown on the online platform immediately. If the vehicle stops moving, the tracker will stop uploading its
location and switch to sleep mode and a few minutes later the tracker status on the platform also will
change to offline. If you would like to keep the tracker online at all times, send SMS
(
keeponline*123456
) to turn off the automatic sleep mode. This function will use more data and battery
power.
How to Use
After installing the SIM card and insert the tracker into OBD socket, you can send SMS to locate
and change tracker settings. The tracker uses password (default is 123456) to control, every SMS
command needs to include the password. If you have set the authorized phone number, some
commands do not need include the password. However, for better security please change the default
password before using.
1. After installation of the tracker, park the car in the open place (indoor or underground cannot
receive the GPS signal), send SMS (
LOCATE*123456
) to the tracker number (SIM car number), the
tracker will reply via SMS message with a Google map link. Click the link to visit the map, the vehicle
location will be displayed on the map. And this determines the tracker is working.
2.
This tracker can download & configure the GPRS & APN settings automatically. If the APN or
GPRS user name & password are not correct for some reason, you can set the APN and GPRS
