out of power and the tracker will switch off automatically.
2. Install SIM card
Press the push button beside the SIM car slot, the SIM card holder will pop out as shown in the
image. Place the SIM card in the holder by leaving the metal pin side face up and then push the
holder back into the tracker.
Note:
1> This tracker use 2G GSM network, and it upload tracking only through GPRS, it cannot work in CDMA
network or 3G(WCDMA or CDMA2000) network. (Many 3G SIM card can use 2G GSM network, this 3G
SIM card can be used in this tracker).
2> Enable the SIM card GPRS data service, order a GPRS data package (20-30M/month) can save data
charge (Normally the tracker will use about 20M GPRS data every month)
3> Please confirm the PIN code of the SIM card is disabled.
4> Before installing or uninstalling the SIM card, please power off the tracker.
3. ANTENNA
The GSM and GPS Antennas are built-in with the tracker.
The GSM and GPS signals may be reduced if the tracker is enclosed by the large metals panels.
4. Using Condition
The operating temperature range for this tracker is from -20°C to 60°C.
5. Back to factory setting (Default configuration)
Send SMS (
factory*123456
) to the tracker will delete all user settings and restore back to factory
configuration.
Note: after the default configuration, IP / APN / GPRS / Language / Time zone / Alarm
Setting etc. are deleted and back to factory setting. All the authorized phone numbers are
deleted and the password will change to 123456. You will need to reset the IP/APN/GPRS name
SIM Card Release (Push)
SIM Card Metal Pin Face Up
