send back OBD & car status information”, if the password is not right, the operation is fault, the tracker
will send back information “Wrong Password”.
OBD information example:
Number of DTCs: 1, P0340, Car voltage: 13V, GPS battery 66%.
The detail information of the DTC please see the car owner book, the different model car has
different DTC, the 4S or fixing factory can diagnostic your car by mobile phone.
15. Check tracker setting
Send SMS “CHECK*123456” to tracker, “CHECK” is the fixed command, “123456” is password.
The tracker will send back information including software version, ID S/N number, IP address,
authorized phone number, GPS and GSM signal etc. if the password is not right, the operation is fault,
and the tracker will send back information “Wrong Password”. The following is an example:
V Mar 03 2014,TQ,CC0830C00820800,58.64.155.133,8011,30,A:13987654321,
B:13876543210, GPS OK,+00,ShockControlGPS,-95dBm,ShockControlGPRS,
CMNET,User,Password,46000,e1d/24a0,93%
V Mar 03 2014
: Software version date
TQ
: TCP/IP Protocol name
CC0830C00820800
: ID S/N number
58.64.155.133,8011
: Server IP and Port
13987654321
: Authorized number (A/B/C)
GPS OK
: GPS status
+00
: Time Zone (00 means GMT time)
ShockControlGPS
: GPS module shock control
-95dBm
: GSM signal strength
ShockControlGPRS
: GPRS is controlled by shock sensor
CMNET
: APN name
User
: GPRS user name
Password
: GPRS password
46000
: Sim Card MCC+MNC
e1d/24a0
: Current Cell ID
Battery: 88%
: Battery
Note: This command is usually used to check the tracker current status & configuration, if the
tracker cannot work well, this command can check what the problem is.
16. Re-power on tracker
