TECH ST-45, Руководство пользователя

Страница: 27 / 32

TECH
No. Specification Unit
1 Supply Voltage V 230V/50Hz +/-10%
2 Max. Power Consumption W 11
3 Ambient Temperature O C
10 - 50
4 Central Heating; Hot Consumption Water;
Floor; Circulation - Pump Outlet Load
A
,
0 5
5 Fan Output Load A
,
0 6
6 Feeder Output Load A
2
6
7
8
9
10
Temperature Measurement Range
Measurement Accuracy
Temperature Adjustment Range
Sensor Thermal Resistance
Fuse Insert
O C
O C
O C
O
C
A
0 - 85
1
45 - 80
-25 - 100
6,3
VIII.Assembly
ATTENTION: all assembly works must only be carried out by qualified
persons. During assembly, the device must be disconnected (make sure
the power cord is unplugged)!
ATTENTION : improper cable connection may damage the regulator!
ATTENTION: the ST-45 controller must be built into the boiler so that
the cable connection strips are not accessible.
The regulator may not be operated in a closed-circuit central heating
system. It is necessary to provide for safety valves, pressure valves and
a surge tank in order to prevent water from boiling in the central heating
system.
-27-