background image

1-5

Advanced features

Electronic “sen-Touch” flush actuation 

A simple touch with the finger actuates the flush. The flush 
can also be activated without contact, by moving to within 
in a 10 mm range. A sensor ensures energy-saving con-
sumption – and effortless toilet flushing.
With the manual actuation option, the flush is actuated via 
buttons. These are available in various colours and mate-
rial variants.

“ceramic-Air” air purification system 

Odours are drawn away at the source, and the cleaned 
air is passed back into the room. There is no need for 
any additional fresh air which would first have to be 
warmed. The air purification system starts when someone 
approaches, and stops automatically after a short run-on 
time. This avoids unnecessary power consumption. The 
activated carbon filter has a long life and does not have to 
be replaced until around five years. 
Note: Certain ceramics are not suitable for using “ceram-
ic-Air” – see the table on page 8-8.

“m-Lift” height adjustment

TECElux enables you to adjust the height of the toilet 
ceramic at any time, even after the module has been 
installed. The ceramic does not have to be removed to do 
this. The height can be continuously adjusted in an 8 cen-
timetre range by means of an adjusting spindle. The glass 
front moves with the ceramic, so the overall appearance is 
not marred by any joints or gaps.

“smart-Connect” interface

Additional functions on the toilet require space, and 
frequently also a power connection or extra water connec-
tion. Up until now, the technology was simply added on 
to the ceramic, and the water and power lines were laid 
visibly next to the toilet. These makeshift solutions are now 
a thing of the past. 
The new toilet terminal takes equal account of aesthetic 
and functional factors: TECElux integrates the system com-
ponents into the pre-wall module invisibly and safely. The 
large inspection opening is covered by a flat glass facing 
that permits quick access to the components behind it at 
any time.

As an open interface between the toilet functions and the 
bathroom architecture, the toilet terminal can be combined 
with virtually any ceramic and also with shower toilets.

TE

CElux

Содержание sen-Touch 9650002













































Отзывы: