- EN -
- 14 -
Cutting Guide Attachment Installation Instruction
1.
2.
3.
4.
5.
Detailer’s Grip Attachment Installation Instructions
Press the Shaft lock button 1, unscrew and remove the collet nut 2 (Fig. B1).
Unscrew the nose cap 3 from the tool (Fig.B2).
Place the collet nut 2 loosely on the end of the rotary tool and insert the cutting bit 4.Tighten
collet nut 2 using the wrench or nose cap (Fig. B3).
Thread the Cutting Guide Attachment 5 onto the exposed housing threads on the
rotary tool (Fig. B4).
Adjust the attachment to the desired cutting depth (Fig. B5).
FIG. B4
FIG. B5
1
2
3
2
4
FIG. B1
FIG. B2
FIG. B3
FIG. F1
FIG. F2
FIG. F3
A
B
C
D
