8
TEC-61201-1
Technical Manualе
PRIZRAK-510, 520 v7
Press the Programming button 10 times within 10 seconds after the
authentication. The Immobilizer will generate a series of 3 audible
signals.
3.
Select the option from the menu by pressing the Programming
button a required number of times (equal to the number of
the option). The Immobilizer will acknowledge the option
number by a series of audible signals.
4.
Go to option setting by pressing and holding the brake
pedal. The Alarm will notify of the option status by a series
of audible signals of a changing duration.
5.
To adjust the settings press the Programming Button the
number of times matching the number of steps from the
current status to the required one. For example, to go from
option 3 (Engine locking) to option 13 (Number of presses per
brake pedal) press the Programming button 10 times. The
Immobilizer will acknowledge the selected function by audible
signals. Please remember that from the last function the
program will go to the first one. Release brake pedal to switch
indication from status to a number of current menu option.
Now you can move to programming the next function or exit
the programming mode.
6. Programming algorithm for function 8 – Doors, hood and
trunk.
Set
any combination of doors, hood and trunk, which upon
opening will generate a signal at a programmable output. For
the purposes of this description, doors, hood and trunk are
referred to as doors.
With
the brake pedal pressed go to option 8. The Immobilizer
will generate 2 successive series of 8 audible signals, and
then will emit irregular audible signals. After hearing the latter
release the brake pedal. The Immobilizer will continue to emit
intermittent audible signals. Open those doors (it can be done
in advance), which are to be indicated by this output. All other
doors should remain closed. Press brake pedal again. The
Immobilizer will inform of the status by series of 8 signals, and
the doors will be assigned to this output. If you do not press
the brake pedal and abort programming, the Immobilizer will
save previous settings. Release the brake pedal, while the
Immobilizer goes back to indication of the option number.
7. Programming algorithm for function 10 – Original buttons.
With the brake pedal pressed go to option 10. The Immobilizer
will generate 2 successive series of 10 audible signals, and
then will emit intermittent audible signals. With the brake
pedal still engaged, press the required button (see Integrator
files). If the Immobilizer recognized the button, it will stop
emitting intermittent signals and go back to indicating option
status by series of 10 signals. Release the brake pedal. Now
the Immobilizer will indicate the option number. If you release
the brake pedal before assigning a button, the Immobilizer will
exit this option, save previous option settings, and go back to
indication of the option number.
8.
Programming algorithm for function 15 – Gearbox status.
With
the brake pedal pressed go to option 15. The Immobilizer will
generate 2 successive series of 15 audible signals, and then
will emit intermittent audible signals. While still holding the
brake pedal, switch the transmission to required position: P,
N, D* or R (you can move the handle to the required position
in advance). For Easytronic gearbox the following positions
are available: R, N, D*. automatic transmission – P, R, N, D*;
manual transmission – only R. Release and press the brake
pedal again. The Immobilizer will stop emitting intermittent
signals and go back to indicating option status by series of 15
signals. Release the brake pedal, while the Immobilizer goes
back to indicating menu option number. If you do not press the
brake pedal and abort programming, the Immobilizer will save
previous settings.
9.
Go to configuring the next option by pressing the Programming
button the number of times matching the number of steps
from the current option to the required one. For example, to
go from option 3 (Engine locking) to option 12 (Speed check)
press the Programming button 9 times. Please note that when
navigating the menu options, the first option follows the last
one.
The Immobilizer will exit programming mode and save all
configuration settings in energy independent memory when ignition
is turned off or within 60 seconds after last menu action if the brake
pedal is released.
*
All handle positions for vehicle advancement (D, S, M, L, etc.).
