Teba therm TP-24, Инструкция по установке и эксплуатации

Страница: 5 / 21

Sayfa 5 / 21
● DAMAGES CAUSED BY USING INAPPROPRIATE PELLET NON-REGULAR
CLEANING ARE NOT COVERED BY WARRANTY.
4.0
PLACEMENT AND INSTALLATION
4.1 GENERAL
Your appliance was tested according to enforcement rules. Thermal
efficiency and flue gas emissions are in the official ranges. Your appliance
was tested and approved according to EN14785 by an authorized
institution.
Although the product is packed to prevent damaging your porduct would
be damaged while it is being transported. Please check your product
carefully on arrival and do not accept damaged product and report it with
the transporter, otherwise the supplier shall not pay for damages.
4.2 SAFETY
* Product must be installed by an authorized person.
* The floor where you are going to install your product must stand the
weight of the product. If the floor is made of combustible material please
use glass, metal or marble base under the product.
* Install you product in a well ventilated area.
* The product must be connected to separate chimney, not to commenly
used chimney. Must not be connected to kitchen aspirator and bathroom
ventilation windows.
*Product must be connected to chimney with the shortest way and with
the least number of elbow. Increasing the number of elbow and the
distance may lead to unwanted results. If the flue pipe is directly
connected to outside a cap must be used to eliminate the effect of the
wind. If it is connected to a present chimney you must use ‘’H’’ shaped