Teba therm TP-24, Инструкция по установке и эксплуатации

Страница: 7 / 21

Sayfa 7 / 21
the connections are controlled for leakage, if there is no leak and the air
inside the pipes is removed boiler may be started. After the set
temeperature is reached the pump starts, then loosen the purging valves
and check whether there is air inside the radiators or not. This procedure is
repeated few times in a time interval to be sure that there is no air in the
system.
*According to the weather conditions of the region where the boiler is
being used,it is recomended to use 1/3 portion antifreeze against coorosion
and freezing.
4.3.1 Electric
Your product must be connected to 230V / 50 Hz electric system. Damages
caused by non regular electric are not covered by warranty.
4.3.2 Flue pipe connection
It is recommended to use stainless steel flue pipe. Pellet stoves must not
connected to commonly used chimneys. They must be connected to
separate chimney. Flue pipe must be connected to the chimney through a
the possible shortest way and with the least number of elbows.