Teba therm TP-24, Инструкция по установке и эксплуатации

Страница: 11 / 21

Sayfa 11 / 21
P4
Thermostat Setting (-) Combustion Fan Speed
Correction
ALARMS
DESCRIPTION Display
Safety Thermostat HV1: signalled also in case of Stove OFF Block
Safety PressureSwitch HV2: signalled with Combustion Fan ON Block
Extinguishing for Exhausting Temperature lowering Block
Extinguishing for Exhausting over Temperature Block
Encoder Error: No Encoder Signal (in case of P25=1 or 2 ) Block
Encoder Error: Combustion Fan regulation failed (in case of P25=1 or 2 ) Block
Failed Ignition Block
Lack of Voltage Supply Block
Lack of Fuel Block
DAY and TIME not correct due to prolonged absence of power supply Block
Anomaly in probe control during Check Up phase Block
Extinguishing for water over Temperature Block
Low pressure in to the Boiler Block
High pressure in to the Boiler Block
The reset of the BLOCK Condition is done by the Long Pressure of the button P1