Teba therm TP-24, Инструкция по установке и эксплуатации

Страница: 12 / 21

Sayfa 12 / 21
Ignition/Exstinguishing
The Ignition is extinguishing are activated with a long pushing of the button P1
The Ignition is signalled by the first blinking than fix led L1
The Work state is signalled by the fix led L4
The Modulation state is signalled by the blinking L4
The Extinguishing is activated with a long pressure of the button P1
The Extinguishing is signalled by the blinking led L3
The Extinguishing finished =OFF state is signalled by the fix led L3
Combustion Power Setting
Click button P2: the display D2 blinks
With other click of the button P2 the power is changed according to the values
Ex .: 1 – 2 – 3 – 4 – 5 – A ( A = Automatic Combustion)
After 3 seconds the new value is memorised and the display shows as normal .
Wood burning : Combustion power 5 is adjusted to burn wood. If you would
like to burn wood there must be pellet in your storage also. Then adjust the
combustion power to 5 and put some wood to burning chamber so that it will