Team Electronic PR8056 TeCom-X5 PMR, Руководство пользователя

Страница: 8 / 27

Dear Customer,
Thank you for buying a TEAM TeCom-X5. TEAM Electronic stands for high-quality radio com-
munication.
To fully understand the various functions and the possible settings and to ensure the proper
operation of the radio, we recommend to read this manual prior to first time use.
The TeCom-X5 is available in these four versions:
PR8056 TeCom-X5 FreeNet : programmed with 6 FreeNet** channels, 500 mW tx power,
bandwidth 12.5 kHz, no registration or fees apply
PR8069 TeCom-X5 PMR : programmed with 8 PMR* channels, 500 mW tx power,
bandwidth 12.5 kHz, no registration or fees apply
PR5058 TeCom-X5 UHF : commercial radio; 128 channels programmable; registration and
fees apply; only assigned frequencies and parameters are allowed
to be programmed; bandwidth 12.5 kHz or 25 kHz;
max. TX power 4 W; UHF 400 - 470 MHz
PR5058 TeCom-X5 VHF : commercial radio; 128 channels programmable; registration and
fees apply; only assigned frequencies and parameters are allowed
to be programmed; bandwidth 12.5 kHz or 25 kHz;
max. TX power 5 W; VHF 136 - 174 MHz
Programming of the TeCom-X5 is done via the additional software T-UP15. A data transfer cable is
included in the scope of delivery.
* = PMR Frequencies ** = FreeNet Frequencies
1 - 446.00625 MHz 1 - 149.0250 MHz
2 - 446.01875 MHz 2 - 149.0375 MHz
3 - 446.03125 MHz 3 - 149.0500 MHz
4 - 446.04375 MHz 4 - 149.0875 MHz
5 - 446.05625 MHz 5 - 149.1000 MHz
6 - 446.06875 MHz 6 - 149.1125 MHz
7 - 446.08125 MHz
8 - 446.09375 MHz
Table of Contents
page
GENERAL 16
Scope of Delivery 16
Maintenance 16
Features 16 - 17
BASIC FUNCTIONS 18
Antenna 18
Battery Pack 18
Charging 18
On / Off
18
Volume 18
Channel Selection 18
Transmit 18
Reception 18
KEYPAD FUNCTIONS 19 - 20
PTT Transmit Key 19
Mult-Function Key 19
Monitor Key 19
Squelch 19
TX Power 19
Scan 19
Radio 20
MENU 20 - 24
01 APO (Automatic Power Off) 02 APRO (Optional Function)
03 BANK (Memory Bank) 04 BATSAV (Battery Save Function)
05 BCLO (Busy Ch. Lockout) 06 BEEP (Beep Tone)
07 SCR NO (Scrambler Type) 08 DC VLT (Info Voltage)
09 DW (Frequency Watch) 10 LAMP (Display Light)
11 LOCK (Keylock) 12 MSGSET (Greeting Message)
13 NAME (Display Type) 14 NM SET (Channel Name)
15 OFFSET (not available) 16 OPN MSG (Opening Screen)
17 PSWD (Passwort) 18 PSWD W (Password Set)
19 ROGER (Roger Tone) 20 SCN MD (Scan Mode)
21 STE (Signal Transmit End) 22 TOT (Time Out Timer)
23 TXSTOP 24 VOX
25 VOX D (Vox Delay Time) 26 VOX S (Vox Sensitivity)
27 VXB (Block Vx on Busy Ch.) 28 WIDNAR (Bandwidth)
5-TONE SELECTIVE CALLING 25
ACCESSORY JACK 25
CTCSS/DCS 50
SPECIFICATIONS 51
14 15
English English
tecom-x5_manual.qxp 04.12.2009 11:59 Seite 14