User Instruction
•
Turn “on” the Spectrum via the power switch at the lower / left corner,
red LED will light
•
Plug a microphone into the body-pack and set the gain control at zero
(max. CCW)
•
Turn the body-pack transmitter “on” via slide switch on the side of
transmitter
•
Observe the Green LED on the body-pack indicating a useable charge on
the batteries
•
Observe the Red LED near the Ch. A volume control, it indicates a signal
being received from the body-pack
•
Turn Ch. A volume to approximately mid scale (12 o’clock)
•
While talking into the microphone, slowly turn the gain control CW until
you’ve achieved a comfortable listening level
•
Using the Handheld microphone, turn it “on” the Green LED will light
and the Red LED adjacent to the Ch. B control will light indicating signal
presence from the handheld microphone
•
Slowly turn the Ch. B volume control CW until the desired listening is
achieved
•
Now venture around the room while alternately talking into each
microphone. Observe no interruption or drop outs while moving about
•
Connect the auxiliary audio sources (computer, projector, DVD player,
VCR) using a shielded cable with appropriate connectors, plugging into
the designated RCA jacks
•
Turn each audio source “on” and engage their operation. Adjust the
volume level of each auxiliary input to the desired listening level. If the
output is distorted or overly sensitive, it is probably due to the signal
output of the audio device being too strong and is over driving the
auxiliary input of the Spectrum II.
•
Once all the auxiliary inputs have been verified and adjusted, the system
is ready for full operation
