Infrared Dome Sensor (ICS-55
)
The ceiling sensor is the preferred
infrared sensor for optimum performance. It comes standard with Maxim
II, Spectrum II, VoiceLink II and VoiceLink IV packages. This is the unit
that needs to be installed on the ceiling. It comes with a
mounting/support bracket and 50 feet of plenum rated cable with RCA
connector on each end. The ideal location for the dome sensor would be in
the center of the ceiling. This will provide a clear signal path for the IR
transmission from the transmitter to the
dome sensor without obstruction. In
addition, you will have 360° coverage and
will minimize the transmission distance
for more reliable performance. It collects
the infrared transmission signal via 6
large detecting diodes. The sensor is
connected to the mixer/amplifier via a
plenum rated cable terminated with RCA
connectors. The mixer/amplifier supplies
the power to the sensor.
Drop-in Battery Chargers
The battery chargers were specifically designed to recharge NiMH batteries
at an optimum rate to maximize their use. The chargers feature a recycle
function, which is used to restore the battery charge capacity and extend
their service life.
BRC-50
charger recharges the Crescent
(IRT-30) and Body-Pack transmitter (IRB-
30). You merely place the Crescent or
body-pack in their respective slot.
Connection will be made and charging
will
commence.
Charger
will
automatically control the rate and
maintain the charge
