9
Electrical Connection
1) Radio Antenna Input (75 Ohm)
2) Line Output (Rear) (Gray)
3) Line Output (Front) (Brown)
4) Dual Zone Audio Output (Gray)
5) GPS Antenna
6) Bluetooth ANT
7) Subwoofer Output (Blue)
8) Dual Zone Video Output
9) Camera Input
10)External MIC
11) ISO Cable Connection:
ISO [A3]
Driver Safety wire
(Brown),
has to be connected to the
parking brake or other suitable
components of the vehicle in such a
way that the video playback of the
device is interrupted for the driver
while the vehicle is in motion.
Please consider that your insurance
coverage may be restricted or
exempted otherwise. Please consult
a specialist in your area if you have
any questions about the
connections.
ISO [A2] (Pink)
Connecting to the
reverse light to switch on the rear
view camera when the reverse gear
is put in
Note on ISO-A Connector:
Depending on the manufacturer, the
contacts on your vehicle connection
may be assigned differently. This is
not a defect of the device but
caused by a deviating connector pin
assignment by the manufacturer of
your vehicle. To provide a
connection that conforms to this
device, please purchase an
appropriate adapter cable from a
specialized dealer if required.
Please consult a specialist in your
area if you have any questions
about the connections.
ISO Connector
RCA Connectors
Left = White
Right = Red
Yellow = Video
ISO-A
A2
PINK
Reverse light connection.
to switch on the rear view
camera when the reverse gear
is put in
A3
BROWN
Driver Safety Wire
A4
YELLOW (B+)
.
Connection for
+12V operational voltage
(diameter at least 2.5 mm²) to
permanent plus of the vehicle.
A5
BLUE
To system control
terminal of an external amplifier
or Automatic Antenna (max.
100mA / 12Vdc).
A6
ORANGE
To dimmer control
terminal. (head light on,
illumination dimmed)
A7
RED ACC (+)
.Connection for
+12V trigger voltage. Connect
to ignition key of the vehicle. If
contacts A4 and A7 are
switched, the device will “forget”
the stored stations after the
ignition is turned off.
A8
GND. ( - / Ground)
Attach the
connection for the ground
(diameter at least 2.5 mm) to
the ground of the vehicle.
ISO-B
Front Speaker
B3 Right
+ (Gray)
B4 Right
– (Gray/Black)
B5 Left
+
(White)
B6
Left –
(White/Black)
Rear Speaker
B1 Right
+
(Violet)
B2 Right
– (Violet/Black)
B7 Left
+ (Green)
B8
Left –
(Green/Black)
