28
When the target moves to another position, tap and hold at the center of the new target.
Repeat each time to complete the calibration process. When completed, tap anywhere in
screen to go back to menu screen.
Handling Discs
µ
Dirty, scratched or warped discs may cause skip ping or noise.
µ
Handle the disc only by the edges. To keep clean do not touch its surface.
µ
Discs should be stored in their cases after use to avoid scratches.
µ
Do not expose discs to direct sunlight, high humidity, high temperature or dust.
µ
Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs
in your car during summertime).
µ
Do not stick or write anything on either side of disc. Sharp writing instruments, or the inks
used in some felt-tip pens, may damage its surface.
µ
DO NOT touch the unlabeled side. DO NOT attach any seal, label or data protection
sheet to either side of a disc.
Cleaning
Cleaning the Cabinet
Wipe with a soft cloth. If the cabinet is very dampen (not dropping wet) the cloth with a weak
solution of soapy water, and then wipe clean.
Cleaning Discs
Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike
conventional records, compact discs have no grooves to collect dust and macroscopic dirt,
so gently wiping them with a soft cloth should remove must panicles. Wipe in a straight
motion from the center to the edge. Never use thinner benzine, record cleaner or anti static
spray on a compact disc. Such chemicals can damage its plastic surface.
