Teac P-55KIT, Инструкция по эксплуатации

Страница: 44 / 49

44
2. Cleaning the cooling fan filter (every half year)
Remove a large screw that holds the grid in
place, remove the grid, take out the filter from
the grid, wash the filer with water, let it fully dry,
and then replace the grid and filter.
Cleaning the tray
Use an appropriate brush or toothbrush to
sweep the tray clean.
CAUTION
Before you attempt to clean the filter, it is imperative to shut down the P-55, wait for the cooling
fan to stop and unplug the power cord. (To drop the temperature inside the unit, the fan continues
to rotate for about 10 to 20 minutes after switching off the power.)
WARNING
Areas indicated by the hazardous heat warning label are very hot while the power is turned on or
just after turning the power off. (Refer to Section 4, Choosing an Adequate Location.)
3. Periodic Checks and Maintenance by Service Personnel
It is recommend that the inside the unit is checked and consumable parts are replaced on a regular
basis to maintain print quality consistency. For information about maintenance or repairs, contact
our customer representative.