Teac P-55KIT, Инструкция по эксплуатации

Страница: 26 / 49

26
Section 12 : Loading Ribbons
NOTES
- Use genuine TEAC ribbons.
- Carefully handle the ribbons to prevent them from being scratched or broken.
- Be sure to take out the ribbon cartridge from the P-55 itself when replacing the ribbon.
The ribbon and components involved may be damaged if you attempt to replace the ribbon with
the cartridge inserted in the printer.
- The Photo ink ribbon is wound on a white shaft, and the Color ink ribbon is wound on a black
shaft. Don't confuse the two ribbons.
- The ink ribbon is identifiable by its colored film roll and the re-transfer ribbon by its transparent film roll.
- To use a single color ribbon, you need an optional purpose-designed cartridge.
- Store ribbons as they were originally packaged.
- Don't leave the ribbon in a high-temperature and high-humidity environment or place subject to
direct sunlight (allowable temperature: 5-30
°
C; humidity: 10-80%).
- Prevent condensation from forming on ribbons while they are stored.
- For high print quality, it is recommended ribbons be used within 6 months of first opening the packs.
- Store ribbons away from dust once opening the packs.
1. How to Load a Ribbon
If the P-55 is not turned on, skip to step 3.
2 U n l o c k D o o r
1)
Press the SELECT button as many times as
necessary for "Unlock Door" to show on the
LCD.
2 R e a d y t o O p e n
P r i n t i n g Y e l l o w
2)
Press the ENTER button. The display will change
to read "Ready to Open".
(If you leave the P-55 alone for 20 seconds or so, the side door will automatically lock again and the
display will get back to "Ready".)
WARNING
If you are going to complete the following steps with the P-55 turned on, never touch anywhere
indicated by the hazardous heat warning label. There is a risk of burn.