Teac P-55KIT, Инструкция по эксплуатации

Страница: 13 / 49

13
Section 5 : Removing Shipping Materials
The P-55 has been shipped with some internal parts fixed in place with special materials to prevent
the unit from being damaged during transportation. Be sure to remove all shipping materials before
use.
NOTE
The P-55 is a precision machine. Be careful not to drop or subject the unit to severe impact (it
weighs more than 22 kg).
1. Peel off adhesive tape from the top left of the unit and press unlock button to open
side door .
2. Remove screw and pull out metallic bar that fixes the heat roller in place. (Store the
bar for future use by attaching it to where marked .)
3. Peel off adhesive tape , flip up lock lever to unlock the ribbon cartridge and remove two
cushions by pulling them toward you.
IMPORTANT
Store the packing-case together with the cushions in case you need to transport the unit.
4. Pull out ribbon cartridge , remove cushion and then put back the ribbon cartridge to its
place for the moment. (You may want to keep the cartridge removed to load ribbons as
discussed later, in Section 12.)
5. Flip down lock lever to lock the ribbon cartridge in place and lift up the side door until it locks.
NOTE
Do not t
ry to forcibly close the side door without flipping down the lock lever, or the side door may
be da maged.
H
J K
H
I
G
D E
F
A B
C