Teac P-55KIT, Инструкция по эксплуатации

Страница: 31 / 49

31
8)
Mount the re-transfer ribbon cartridge in the
P-55 itself.
When mounting the ribbon cartridge, push it
directly and slowly. If you try to force it in
slantwise, there is a chance that the ribbon
might be broken. If the ribbon clogs
somewhere, take out the cartridge, take up
ribbon slack again, and slowly re-insert the
cartridge.
9)
Once both the ink ribbon cartridge and the
re-transfer ribbon cartridge have been
mounted, lock them in place by flipping down
the lock lever.
10)
After locking the ribbon cartridge in place,
make sure that ribbon slack has been
removed before closing the side door.
NOTES
- The side door is designed so as not to close unless you lock the ribbon cartridges in place with
the lock lever. If you try to forcibly close the side door, there is a chance that the side door might
be damaged.
- Caution in ribbon replacement: It is imperative to take out the cartridge from the P-55. If you try
to force the ribbon replacement with the cartridge mounted, there is a chance that the ribbon or
components involved might be damaged.
- Be sure to change the ink ribbon when it is fully consumed, which yields the error message
"No INK Ribbon" or "No TFR Ribbon". (If you open and close the side door without changing a
fully consumed ribbon, a tape that holds the ribbon shaft and the ribbon itself in place may be
peeled off and thus the ribbon may get stuck in the mechanism, likely causing the printer to go
out of order).
- Avoid dust to store the ribbon installed in the ribbon cartridge.