Teac P-55KIT, Инструкция по эксплуатации

Страница: 11 / 49

11
Section 4 : Choosing an Adequate Location
The P-55 has been shipped with some internal parts fixed in place with special materials to prevent
the unit from being damaged during transportation. Be sure to remove all shipping materials before
use by referring to Section 5, Removing Shipping Materials.
Avoid placing objects in front of the disc tray, or they might cause damage to the tray driving
mechanism.
Ambient temperatures should be between 15 and 30 degrees centigrade and atmospheric humidity
should be between 30 and 70%.
Inside the P-55 there are components that cause heat buildup (such as thermal print head and heat
roller). So you should be concerned with air circulation.
CAUTION
Do not block the lateral exhaust opening and the rear intake opening by walls or other obstacles
(a free space of more than 10cm/4 inches is a must). Heat trapped inside the unit might result in
fire or other hazards, as well as malfunctioning and/or deterioration in print quality.
Place the P-55 on a stable, horizontal surface free from mechanical vibration or shock.
To maintain consistent print quality, avoid places where temperatures sharply change because of
the direct sunlight or nearby heating apparatuses.
Avoid dusty places, or the print quality might deteriorate or the printer might suffer failures.
Never install the P-55 close to windows through which rain droplets can sneak in, which might
cause malfunctioning.