Teac HDR9650TS, Руководство пользователя

Страница: 10 / 44

5
REMOTE CONTROL
1. To use the remote control, point it towards the front of the HDR9650TS.
2. The remote control has a range of up to 7 meters from the HDR9650TS at an angle
of up to 60 degrees (30 degrees on each side).
3. The remote control will not operate if
the signal’s path to the sensor is blocked.
Note:
- Sunlight or very bright light will decrease the sensitivity of the remote control.
- Old Batteries will decrease the sensitivity of the remote control. When this happens,
replace the old batteries with new ones.
Installing the Batteries
1. Remove the battery cover from the remote control and put two AAA size batteries
inside the compartment.
2. The diagram inside the battery compartment shows the correct way to install the
batteries. Pay attention to the +/- polarities and install accordingly.
CAUTION:
1.
Keep batteries out of children’s reach.
2.
Don’t attempt to recharge, short-circuit, disassemble, heat or throw the batteries into
the fire.
3. Always replace both batteries at the same time. Never mix new and old batteries or
batteries of a different type.
4.
If you don’t intend to use the remote control for an extended period, remove the
batteries to prevent possible leakage and corrosion.
5. Do not drop, hit or step on the remote control.
6. Do not spill water on the remote control.