User’s Manua
l
27
7. Channel Search
This will guide you through parameter settings to search for channels.
7.1 Advance Frequency Edit
In general, multiple television or radio broadcasts are transmitted though a single frequency.
This is a frequency with multiple channels. In Mux Edit window, the unit presets dozens of
frequencies, so you can modify or delete them. You can also add some new frequencies.
Select Main Menu
→
Channel
→
Mux Edit and press
OK
key to enter.
Note: Make sure you are familiar with the technical aspects of the channel frequency
before you proceed to edit it.
1. Add Frequency
Press
OK
key to pop up a drop-down list. Select
“Add” and press
OK
key to pop up add Mux window,
in which you can add a frequency by performing the
following steps:
1. Press numeric keys to input new frequency
values.
2. Press
keys to select proper bandwidth.
3. Press
EXIT
key to save and go back to the
previous menu.
4. The new frequency is shown on the end of list.
2. Modify Frequency
1. Press
keys to select a Mux.
2. Press
OK
key to pop up a drop-down list.
3. Select “Modify” and press
OK
key to pop up modify Mux window.
4. Press
or number keys to set proper values.
5. Press
EXIT
key to save the setting.
3. Delete Frequency
1. Press
keys to select a frequency.
2. Press
OK
key to pop up a drop-down list.
3. Select “Delete” and press
OK
key to delete it.
7.2 Auto Search
For beginners, auto search is the best choice.
Select Main Menu
→
Channel
→
Auto Search and
press
OK
key to enter. The system will search
channels according to default parameters. Updated
TV and Radio channels will be sorted automatically.
Note: Do not interrupt the searching to avoid
data loss.