Teac FD-55 Series, Руководство по обслуживанию

Страница: 94 / 216

(q) Key in "F" . (STOP)
(r) If the DSO indicator of the SKA is off, execute drive select by key
"0". (DSO indicator turns on).
(s) Key in "Cl*. (SEEK TMAX).
(t) Repeat the procedure from items (m) to (p) and adjust so that the
items (o) and (p) are satisfied at track 00 and at the innermost
track.
(u) Key in "F". (STOP)
(v) The items (o) and (p) are applied to the side 0 head. However, as
to. the unload level in item (o) will be excluded unless it is the
same read level as the head load condition.
Depress key "4" to turn off the SIDE 1 indicator of the SKA and
confirm in the same procedure of items (L) through (u) for the side 0
head.
(w) Key in "CO" and confirm that the TRACK indication Becomes "00".
(RECALIBRATE)
(x) After opening the front lever, draw out the disk slowly. In the
process of drawing out, the side 0 and side 1 heads shall not catch
the head window edge of the disk jacket (opening area of the jacket
to make the head be in contact with the disk surface). The jacket
can be drawn out smoothly with appropriate space margin.
(y) Insert the disk slowly and confirm that the disk jacket does not
touch the side 0 nor the side 1 head and goes into the FDD smoothly
with appropriate space margin.
(z) If the items (t), (v), (x), or (y) is out of the specification, refer
to item (u) of "General method".
4056