Teac FD-55 Series, Руководство по обслуживанию

Страница: 59 / 216

iii) For J10 (option) and J12 (option), pull out slowly in the same
manner as in item i) and ii).
(b) Connection of the connector
Make the polarizing key position of the housing correspond with the
lack of the post pin, and push the housing carefully with the
fingers. .
(c) Removal of the pin
Lifting up the stopper of the housing with a narrow object such as
cutter knife, pull the cable with a pair of tweezers in the direction
indicated by the arrow. Refer to Fig.404.
(Fig.404) Sectional view of black connectors
(d) Insertion of the pin
Before insertion, check the pins according to item (3)- (d), i) through
iii).
When you insert the pin, it should be so inserted that the projection
side faces the stopper of the housing. After the insertion, pull the
cable with a pair of tweezers softly in order to confirm whether it
is securely connected.
4019