Teac FD-55 Series Скачать руководство пользователя страница 186

Страница: 186 / 216

Notes : 1. As to the parts with an asterisk in the £>'ty column, select

appropriate one for the model.

2. As to the parts with model name of FD-55(L) in the Description column,

the parts is used only for the model._

3. For the DD motor Ass'y of FD-55CL) A or B, either of 14733730-00 and

-10 may be used.

(Mainly -10 is used at shipment).

For the stepping motor A s s 1y of FD-55(L) A or B , either of 14769070-00

and -50 may he used.

(Mainly -50 is used at shipment).

4. Pad 9B is attached for the adjustment of head touch (refer to item

4-4-9) and some models might not have it.

Usually,

double sided

FDDs have not 9B pad.

5. The head protector Ass'y applies only to the double sided models with

head load solenoid.

6. The shift lever (P/N 16802550-00) is used in all the models except

for CSS models.

P/N 16802592-00 is used only in the double sided

CSS models.

7. The parts number of the lever shaft A s s ‘y listed in the table is the

standard length.

Optional lever shaft Ass'y which length is different

should be designated with other parts number.

8. The head load solenoid Ass'y applies only to the models with head

load solenoid.

The CSS Ass'y applies only to the double sided models

without head load solenoid.

The head load solenoid Ass'y and the

CSS Ass'y will never be used together in a model.

9. The head carriage Ass'y is supplied in combination with two guide

shafts.

Be sure to replace the head carriage Ass'y-with these guide

shafts.

10. The parts number versions of the PCBA MFD control #B and the PCBA

front OPT vary depending on each model.

Refer to the name plate

of the actual PCBA mounted to designate the version.

11. fThe parts numbers of the front bezel Ass'y and the front lever Ass'y

are those of FD-55(L) standard color, black.

For designating the

other color, refer to the following table.

Optional designation of

colors than in the table or other forms, different parts numbers

should be used.

509

Содержание FD-55 Series

























































































































































































































Результаты поиска

Содержание FD-55 Series

Отзывы:

Похожие инструкции для FD-55 Series

Бренды по названию

Популярные бренды

Teac FD-55 Series, Руководство по обслуживанию

Результаты поиска

Содержание FD-55 Series

Отзывы:

Похожие инструкции для FD-55 Series

Бренды по названию

Популярные бренды