Teac FD-55 Series, Руководство по обслуживанию

Страница: 51 / 216

4-1-4. Maintenance Jigs and Tools
The following are the jigs and tools required for adequate maintenance
of the FDD.
(1) Equipment
(A) When Simulator KA (off-line exerciser, abbreviated to SKA) is used:
(a) Two different models of SKA are used for the maintenance of FD-55A
through F, and for FD-55G. For FD-55G, designate SKA(-G) .
The following accessories are necessary for operating the SKA (the
accessories are supplied with the SKA). .
i ) SKA/FFD interface cable (-00)
ii) Check cable #1 (for observation of control signals)
iii) Check cable #2 (for observation of read amp. output signals)
iv) SKA/FDD power 'cable ' • - ■ -
(b) Oscilloscope (two channel)
(c) DC power supply (+12V, 1.2A and +5V, 2A) or SKA power supply.
The following accessory is required for the power supply (The
accessory is supplied with the SKA power supply).
i) Power cable (4P)
(d) Thermometer and hygrometer
(B) When SKA is not used:
(a) FDD controller and DC power supply (user's system)
(b) Oscilloscope (two channel)
(c) Frequency counter
4011