19
EN
G
LI
SH
Play the source to be recorded and adjust the recording level so
that the loudest sound does not exceed the “OVER”
indicator on
the peak level meter .
The level can be adjusted as follows:
<
When the POWER button or the Stop (
H
) button is pressed, the
recording level is reset to 0 dB .
<
The volume level differs depending on the source (record, cassette
tape, CD, etc .) . To record various sources at the appropriate volume,
the recording level should be adjusted for each source .
6
Press the Play (
y
) or the Pause (
J
) button to start
recording.
Recording starts .
7
Play the source to be recorded.
When the playback of the source has been finished, press the
Stop
(
H
) button to stop recording .
To stop recording
Press the Stop (
H
) button to stop recording .
<
If the CD-R is finalized, it can be played with another CD player .
To pause recording
Press the Pause (
J
) button . “WAITING” briefly appears on the
display, then recording is paused .
To restart recording, press the Play (
y
) button or the Pause (
J
)
button .
<
You cannot restart recording while “WAITING” is displayed .
<
Remember that every time recording is paused or stopped, a new
track number will always be assigned . It is not possible to record in
two “stages” within one track .
To monitor the input signal
When no recordable disc is loaded in the unit, press the RECORD
button .
“MONITOR” appears on the display, and you can monitor the input
source via the PHONES jack and the output terminals . The meters
show the current input level .
Exit the monitor mode by pressing the Stop (
H
) button .
Manual track division
It is possible to divide a track into multiple tracks by pressing the
RECORD button while recording .
<
Manual track division is possible regardless of the AUTO/MANUAL
setting .
<
A track cannot be less than 10 seconds in length . The RECORD
button will not work if it is pressed within 10 seconds from the
beginning of a track .
0 dB
–
∞
+12 dB
−60 dB
MIN .
DOWN
UP
MAX .
