ADCP-96-088 • Issue 2 • 6/2013
Page 25
© 2013, Tyco Electronics Corporation. All Rights Reserved.
Figure 18. Splitter Compartment Mounting Slot Assignments
3. Remove the dust cap assembly from the selected splitter slot.
4. Remove the corresponding feeder cable connector(s) from the rear of the splitter
compartment as shown in
.
Warning:
Infrared radiation is invisible and can seriously damage the retina of the eye. Do not
look into the ends of any optical fiber. Do not look directly into the optical adapters or
connectors. Exposure to invisible laser radiation may result. An optical power meter should be
used to verify active fibers. A protective cap or hood MUST be immediately placed over any
radiating adapter or optical connector to avoid the potential of dangerous amounts of radiation
exposure. This practice also prevents dirt particles from entering the adapter or connector
.
SPLITTER
INSTALLED
IN SLOT 1
21603-A
12
11
10
9
8
7
6
5
4
3
2
1
SLOT NUMBERS SHOWN
FOR REFERENCE ONLY
SLOT NUMBERS SHOWN
FOR REFERENCE ONLY
24
2
3
22
21
20
19
1
8
17
16
15
14
1
3
DUST CAP ASSEMBLY
(INSTALLED IN EMPTY
SPLITTER SLOTS)
PLUG AND PLAY
SPLITTER
LEFT SWING FRAME SPLITTER COMPARTMENTS
RIGHT SWING FRAME SPLITTER COMPARTMENTS
3
7
38
3
9
40
41
42
4
3
44
45
46
47
4
8
SLOT NUMBERS SHOWN
FOR REFERENCE ONLY
SLOT NUMBERS SHOWN
FOR REFERENCE ONLY
25
26
27
2
8
29
3
0
3
1
3
2
33
3
4
3
5
3
6
