TE Connectivity 2376800-1, Руководство пользователя

Страница: 9 / 65

RBK-X1C
PN 2376800-1
Page 8 Rev. A Dec. 2020
1.4 Rear Panel
Fig. 1-4: Rear Panel
1. USB port.
(USB connection hole. Communicate with HMI, like barcode scanning and data collection)
2. Ethernet Port.
(Access to upgrade program to PLC and touch screen)
3. Air Cooling Socket.
(Connects to air cooling kit 1-529533-7, refer to section 4.6.4)
4. RS 232 Connector.
(Connects to welding machine, like Schunk welding machine.)
5. CD port.
(Connects to centering device via CD cable. Refer to section 1.2 item 12, CD cable.)
6. Cooling Fan.
(Operates when heater temperature above 190º C.)
7. Air supply kit.
(F.R.L)
8. Air inlet.
(4~6 bar.)
9. Heater Fuse.
(230V AC, 3A anti-surge)
10. Fan Fuse.
(230V, 1A anti-surge)
11. Main Power Switch.
(Used to turn ON/OFF power to RBK-X1C.)
12. Power Input Socket. (230V)
13. Main Power Fuse.
(2 x 230V, 3.15A anti-surge)
Do not use the Main Power Switch, or the Emergency Stop button on the front panel
(see Figure 1-2), to turn off the machine, as this will cause a significant reduction to
the life of the heater element. Turn off the heater using the I/O Switch on the front
panel. Cooling continues until the temperature falls below 190º C. At that point, the
fan turns off and the machine enters the standby mode. The power can now be
switched off using the Main Power Switch.
8 Air inlet
10 Fan fuse
11 Main power switch
12 Power input socket
13 Main power fuse
2 Ethernet port
1 USB hole
4 RS232 connector
6 Cooling fan
7 Air supply kit
9 Heater fuse
5 CD port
3 Air cooling socket