TE Connectivity 2376800-1, Руководство пользователя

Страница: 6 / 65

RBK-X1C
PN 2376800-1
Page 5 Rev. A Dec. 2020
1. Introduction
1.1 General Information
Fig. 1-1: General View
The RBK-X1C is a semi-automatic unit using an infrared process to heat shrink TE Connectivity ILS-125,
ILS-85 and QSZH products onto ultrasonically welded or crimped splices.
The equipment is designed to operate in conjunction with ultrasonic welders, positioned adjacent to the
welding head.
The heat chamber takes ILS and QSZH products from size 1 to 3A and has electrically heated quartz glass
elements that provide the heat source,
up to 600
º
C . Operation of the chamber is prevented until its
temperature is within 10
º
C (editable) of the set operating temperature.
Activated by two start buttons, the heating chamber moves forward, enclosing the joint area. It remains in
place for the set time period, and then returns to the rear rest position, automatically ejecting the wire
assembly with the RBK-ILS splice sealing product installed.
In the event of a power failure, the heating chamber is retracted to the rear rest position.
The RS232 interface allows Time , Temperature , and Product size to be transferred from a remote
machine (e.g. ultrasonic welding equipment) or control computer.
Ten pre-set memory buttons can be programmed for local storage of Time, Temperature, and
Product size. These can be selected individually, or selected in a set sequence by the operator.
500
º
C is the maximum recommended set temperature.
Setting the temperature close to or above the upper limit of 600
º
C can
reduce heater life.