TE Connectivity 2155369, Инструкция по эксплуатации

Страница: 8 / 26

Customer Manual
取扱 明書
409-78005
Rev B3 8 of 26
Guide to Compression Cycles
For JIS(Japan Industrial Standard) DIES
This guide indicates the number of cutting cycles that the tools can be expected to perform when the battery is
fully
charged. These figures are approximate and may vary according to the charging conditions.
When the compression capacity is reduced to about 1/2 of a normal cycle, this indicates that the battery life is
exhausted and the battery pack should be replaced with a new one. .
Conductor size The number of crimps per charge
14mm2 440 times
22 mm2 330 times
38mm2 300 times
60mm2 270 times