TE Connectivity 2155369, Инструкция по эксплуатации

Страница: 5 / 26

Customer Manual
取扱 明書
409-78005
Rev B3 5 of 26
Precautions for the crimping tool

This tool is designed to an average operating life of 10,000 times of crimping. Do not use the
tool after this operating life is over.

Select the appropriate male and female indent dies combination for the connector to be crimped
Incorrect combinations will result in inferior connection of the conductors.

Do not operate the tool without dies and a connector in place.

If operating this tool at a temperature of less than -5°C, allow the tool to stand at a room
temperature of between 10°-25°C for 1 hour before using the tool. This is to ensure the smooth
flow of the hydraulic oil and correct operation of the tool.

The valve cartridge is activated and a click is heard when crimping is completed.
The yellow band around the ram becomes visible when the ram is fully extended.
If the yellow band does not became visible, stop the operation and check the condition of the
tool.
Precautions for the battery pack

Do not short circuit the contacts

Do not expose the pack to water, oil or solvents.

Do not disassemble, modify or attempt to repair the battery pack

Do not dispose of the battery pack in a fire or as domestic garbage

Do not drop or otherwise abuse the battery pack .

Do not leave the battery pack in locations where it is exposed to a temperature greater than
40
℃
for an extended period.

Do not short circuit the battery by attaching foreign materials to the contacts.
Stop using the battery pack if rusting on the contacts appear.

To maintain long life of the Li-Ion battery, the protection feature to stop the output is installed.
When the trigger is pressed with low battery capacity, the motor stops. It is the function of the
protection feature and not an electrical breakdown. Charge the battery if it happens.

Precautions for the battery charger

The LED indicator lights in green and remains lit when the unit starts charging a battery pack. The
indicator changes to orange when charging is completed.

This unit is for charging battery packs BP-1420LN only. Do not use the charger for any other
devices.

Allow battery packs to cool down before charging. Allow at least 15 minutes between charges
when charging several packs in succession.

The charging time is approximately 30 minutes (80% capacity) and 40 minutes (100% capacity).

Never short circuit the output terminals .

Do not expose the charger to water, oil or solvents .

Do not disassemble or attempt to modify the charger .

Do not drop or otherwise abuse the charger.