TE Connectivity 2155369, Инструкция по эксплуатации

Страница: 10 / 26

Customer Manual
取扱 明書
409-78005
Rev B3 10 of 26
1. To attach the battery pack, slide it into the tool until it stops.
2. To detach the Battery Pack, pulling out the battery pack
while pressing the latches.
3. After inserting the battery Pack, check it is securely in
place by pulling it gently. Do not press the Latches
when pulling the battery.
Trigger & Release Button
The Ram advances when the Switch Knob is pressed and stops
when the Switch Knob is released.
To retract the Ram, press the Release lever. The Ram continues to
retract while the Release lever is pressed.
CRIMPING OPERATIONS
1. Select an appropriate size of die for the connector
2. Pull out the Slide Pin and open the Yoke.
3. Insert Nest die into the Yoke and the Indent die to the Ram securely.
4.
Close the Yoke and push the Slide pin in securely.