TE Connectivity 2155369, Инструкция по эксплуатации

Страница: 11 / 26

Customer Manual
取扱 明書
409-78005
Rev B3 11 of 26
5. The head is 180
°
rotatable. Rotate the head to the desired position for the job.
6.
Place the connector and press the Trigger and advance the ram so
that the connector is held between the dies.
7.
Insert the conductor into the connector.
Press the Trigger until the compression is completed.
A click will be heard when completed. The yellow band around the
Ram becomes visible when the Ram is fully extended.
8. Press the Release lever to retract the Ram. The Ram continues to
retract while the Release lever is pressed. The Ram stops when it
reaches the lower end.
9. Open the Yoke and remove the crimped conductor.